• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

1987 ranger 2.9l auto , 2wd


Joined
Sep 14, 2007
Messages
9
Vehicle Year
1988
Transmission
Automatic
Hi there. I am in need of ideas to get my ranger running. It is a 1987 ford ranger 2wd, 2.9L automatic.The engine spins over but will not start. There is spark because when I shoot fuel down the throttle body it starts then dies. I have changed the inertia switch, computer, tried a new fuel pump relay and manually jumper-wired to get power from the fuel pump to get fuel to the rail. I have tried to start truck after each procedure and still can't get the fuel relay to click on to turn the fuel system on. Any ideas?
 
Hi there. I am in need of ideas to get my ranger running. It is a 1987 ford ranger 2wd, 2.9L automatic.The engine spins over but will not start. There is spark because when I shoot fuel down the throttle body it starts then dies. I have changed the inertia switch, computer, tried a new fuel pump relay and manually jumper-wired to get power from the fuel pump to get fuel to the rail. I have tried to start truck after each procedure and still can't get the fuel relay to click on to turn the fuel system on. Any ideas?

Do you hear the fuel pump run when you jumper power to it?
 
re ranger

hi there i dont hear pumps turn on on ether tanks thats why i went to the relay im stumped on this on
 
lol sorry yes the pump turs on and there is fuel at the rail but still wont start its like the injectors wont turn on
 
lol sorry yes the pump turs on and there is fuel at the rail but still wont start its like the injectors wont turn on

Pull one of the injector plugs off and measure and see if it has 12 volts. all the injectors should have 12+ at the them when the key is on, the computer applies the ground to fire the injector.

When you first turn the key on before you try starting the truck is the check engine light coming on?
 
Have you tried the pumps themselves?
 
i will try and see if there is power at injectors with key on !! and yes i can manuly power pumps i just cant get to fuel system to turn on there is power to the fuel pump relay , i just have no past there !!!
 
the check engine light comes on , i will measure to see if there is 12 v at injectors what if there is no power there ???? i have tryed ecm inurtia switch relay
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top