1987-1988 STX Rear Tube Bumper

[alwaysFlOoReD]

Not sure if you guys can open these mounting instructions pdf's. If not, let me know and I'll try to upload them as JPEGs.

Works for me. Orientation is off tho.

 

[Shane B76]

I have owned this truck since 1992 (technically, I've owned it twice...but that's a story for another day), and it still has nearly every original part on it, or I still have them in boxes. So if I can be of any help to anyone else on other stuff associated with my truck, I'll be happy to help.

1987 Ranger STX XLT 4x4
Single cab, standard bed
Factory brush guard with lights, roll bar with lights, rear tube bumper (what's left of it), factory Sport stripe decal package
Bucket seats, with power lumbar and adjustable thigh support, adjustable side support, embroidered STX (rare??)
5 speed manual
2.9L
A/C
No tilt; no cruise
Crank windows

 

[Shane B76]

I corrected the orientation of the PDFs on my computer, but they didn't upload correctly. Not sure how to fix that....sorry.

 

[Shane B76]

Getting a lot of "patina" on that original paint!

 

[85_Ranger4x4]

Looks sharp, I have the same wheels on my '85.

I fixed your bumper pics, after you upload click the "full size button on the right hand side to post the full picture. I will let you edit your truck pic and play with it.

 

[Shane B76]

Looks sharp, I have the same wheels on my '85.

I fixed your bumper pics, after you upload click the "full size button on the right hand side to post the full picture. I will let you edit your truck pic and play with it.

Thanks for fixing the orientation. I'm dangerous when it comes to computers.

 

[85_Ranger4x4]

Thanks for fixing the orientation. I'm dangerous when it comes to computers.

I didn't fix your orientation, I think that is how it was scanned. I just made your uploaded pictures display full sized.

 

[bjlohmoeller]

Thank you so much Shane B76. I will use your information and design what I can with CAD and hopefully reproduce one for myself.

 

[Shane B76]

Thank you so much Shane B76. I will use your information and design what I can with CAD and hopefully reproduce one for myself.

Glad to help out.
If you end up fabing one, let us all know how it turns out.
I'm sure that you'll get a lot of requests from people who want to buy one from you.

SB

 

[sgtsandman]

What's left of the original bumper....insane rust, right??View attachment 104851View attachment 104852View attachment 104853View attachment 104854View attachment 104855View attachment 104855View attachment 104858View attachment 104860View attachment 104856View attachment 104855View attachment 104859View attachment 104857

Yep, that looks like standard rust belt results on tubing products. Nice content on the whole thing though.

 

[VonRicky]

I'll buy the rusted bumper from you when you are done with it. I want to cad up the mounting / plate brackets to waterjet and bend for diy weld kits. The tubing part is easy, fabbing the brackets nicely to fit is a bit more time consuming for non metal working folks.


Leigh

 

[Shran]

I'll buy the rusted bumper from you when you are done with it. I want to cad up the mounting / plate brackets to waterjet and bend for diy weld kits. The tubing part is easy, fabbing the brackets nicely to fit is a bit more time consuming for non metal working folks.

I sort of already did this if you want the files, you just gotta cut me in on the profits if you use them & sell it

This was for my stepside truck but it might work fairly well with a fleetside truck too. Not sure. My bumper bolts onto the factory mounts plus one additional bolt per side through an existing hole in the frame to stiffen it up - maybe not necessary but I used 1/4" wall pipe for my bumper so it weighs like 100lbs.........

 

[VonRicky]

That bumper is sweet, bang up job brother. I'd love the files if you're willing to share. No point reinventing the wheel !

 

[Bird76Mojo]

Ebay NOS tube bumper

I'd grab it myself if I thought it would look good on my V8 truck. Not sure though...