wizkid00104
Well-Known Member
- Joined
- Oct 15, 2007
- Messages
- 1,720
- Vehicle Year
- 1994/2002
- Transmission
- Manual
I know the cases bolt up the same, but what will need to be done in order to make the the dash light indicators for 4 wheel drive work again.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
1354 Electric to 1354 Manual Swap
- Thread starter wizkid00104
- Start date
Wicked_Sludge
Well-Known Member
the manual case has a 2 wiring harness that goes to it. the wiring has to be spliced into the trucks harness near the drivers side fender. the wire colors escape me at the moment...hopefully someone else will chime in.
- Joined
- Jun 1, 2001
- Messages
- 7,897
- Age
- 63
- Vehicle Year
- 1987... sorta
- Transmission
- Manual
No splicing required.
there is a weather pack connector near the main firewall connector that
the two-wire harness from the T-case indicator switch plugs into.
the wire colors are pale blue and pale blue with a black stripe.
AD
there is a weather pack connector near the main firewall connector that
the two-wire harness from the T-case indicator switch plugs into.
the wire colors are pale blue and pale blue with a black stripe.
AD
Wicked_Sludge
Well-Known Member
is it part of a bigger harness? ive never been able to locate those two wires on mine 
wizkid00104
Well-Known Member
- Joined
- Oct 15, 2007
- Messages
- 1,720
- Vehicle Year
- 1994/2002
- Transmission
- Manual
Ditto, mine does not have the plug.
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
