08 Ranger Stock HU to amp wiring ??

[TheBrain]

Got an Alpine MRP-F300 4 channel amp I plan to run it off of the factory head unit. I have seen a couple of posts on here and other places that show the wire colors from the factory HU. I have also seen a post stating that the 08 wire colors are not the same as previous years. After removing the radio, I discovered that the 08 is different from other years. Has anybody out there wired up an 08 yet?

Also wondering how everyone else is running the remote turn on lead???

Thanks and Merry Christmas!

 

[Ranger SVO]

Left Front Speaker(+) WHITE
Left Front Speaker(-) WHITE/BROWN
Right Front Speaker(+) WHITE/PURPLE
Right Front Speaker(-) WHITE/ORANGE
Left Rear Speaker(+) WHITE/GREEN
Left Rear Speaker(-) BROWN/YELLOW
Right Rear Speaker(+) BROWN/WHITE
Right Rear Speaker(-) BROWN/BLUE

For a remote lead use the TRUNK-LOC by PAC-Audio
http://www.pac-audio.com/products/productsCatagory.asp?mmSearch=Adding-An-Amplifier#trunk-loc

This LOC will provide a remote lead whenever the radio is turned on

If speaker colors are wrong please let me know

 

[TheBrain]

You are correct. I figured out the wiring and got the amp installed. Actually sounds very nice! Now I just need to get my sub installed.