03 ranger 4.0 motor mount NUT size

[Big Puddin]

Dumb question I know but my 4.0 motor mount nuts got lost, didn't catch until after set motor trans in place. Cannot find online, hate to pull motor and trans again to take a motor mount down to hardware fastener aisle. Since 03 ranger I'm guessing metric. Hate to go ask parts store to pull one from in back and then go fumbling through their multipacks to try to find a nut that'll fit. I hope someone will have a 4.0 motor mount laying on their bench and can tell me, thNks for your time to read and help.

 

[2Krngr]

Dumb question I know but my 4.0 motor mount nuts got lost, didn't catch until after set motor trans in place. Cannot find online, hate to pull motor and trans again to take a motor mount down to hardware fastener aisle. Since 03 ranger I'm guessing metric. Hate to go ask parts store to pull one from in back and then go fumbling through their multipacks to try to find a nut that'll fit. I hope someone will have a 4.0 motor mount laying on their bench and can tell me, thNks for your time to read and help.

I have a pair laying around but not 100% where I put them. I will try to remember to check tomorrow after work.

 

[lil_Blue_Ford]

They are metric, but I don't remember the size. I had bought a handful of assorted metric flange nuts from one of the local tractor supply places that sells nuts and bolts by the pound. Used what fit and the others went in a bin for possible future use


Sent from my kite using a trebuchet

 

[Mac]

They are 12M 1.75
Dave

 

[Big Puddin]

Thanks everyone