The username is based on my old 92', she unfortunately lost the fight with time. What I am finally posting about and looking for some help here and there on (I am far from a mechanic) is my 2000 xlt. 4x4, 3.0 and the kicker. Only 90000 on her, about 4k of which are mine since getting her...
I'm wondering what type of speakers are the stock speakers in a 2001 Ranger?
I had the door panels off to repair the door latch linkage and saw a felt-covered speaker in the door.
I did not peel the felt back to look.
Is it a full-range speaker with a "whizzer cone" like is pictured in this...
So, I've already completed this swap, after taking many months of time to gather resources, do some homework, and jump into the grease pit but it was worth it.
My vehicle is a 2000 Ford Ranger 3.0 V6 FFV 2wd (non-edge)
I did not make use of a donor vehicle for this swap.
Here's the information...
Before I start, yes I know I'm doing something stupid that'll probably kill my engine, but I'm okay with that.
So, I'm doing a cheap turbo build on my 2000 Ranger 3.0 Flex, and need to figure out a tuning situation. I'm using the factory EEC-V ECU in the Ranger, and have read of quite a few 3.0...
Hi,
So i bought a 1988 radio. It has a lot of static so I got a new antenna and installed that.
The static didn't go away. I figured out that I can turn the volume knob and at one particular spot, the radio clears up.
I don't know why this is, can anyone help? Do I need a new stock radio?
I...
my ranger has been getting hot usually staying between the N and the O on the temp gauge, I feel like this is high especially when its only in the 80s or very low 90s. Today though it got to 105 out and I was taking my truck up a fairly steep hill when it got to the top of the N, I decided to...
Hey guys! new member....just posting my truck to get some ideas. Its a 88 ford ranger all stock. 2.9 2wd 5 speed. 88k miles.
Things i'm thinking about doing to it:
djm 3/4" drop kit
projector headlights
tinted windows
tinted marker lights and tail taillights
2-10's behind the seat
It's a...
Howdy folks.
i've got my hands on a gem of a Ranger.... 96 4.0 2WD auto with low miles.
The wheels on it are the stock 14x6 4-hole design, and I measured 3.75" backspacing on the one that had a blowout (the tires are shot!)
So this is a perfect opportunity to upgrade the wheels and tires...
yesterday i bought a 86 ranger that needs a new motor(2.9).... my question is, is there a better engine, that is more powerful.... but at the same time still fuel efficient? also is the 2.9 a good towing engine? what is the grand toltal of a engine/tranny swap?
Hey,
I am trying to find the best way to be able to hook my ipod touch 4G into my stereo. I also want to keep the stock head unit. I was wondering what would be the best way of doing this?
I have a 2002 xlt without the 6 cd changer and i am not sure if it is set up for it (i've been looking...
Did the Dana 35 on rangers or explorers ever come stock with manual hub lockouts? I've got a D28 with manual hub lockouts and want to upgrade to a D35. The only D35's I've seen are auto hubs (which isn't what I want). Thanks.
-akx
I'm getting ready to POR-15 my I-Beams (as well as a ton of other things). I'm putting all new hardware on the beam and outward. I just got the ball joints out tonight, it looks like I have 0 degree fixed cambers currently. They're rusting to no end, so I want to replace them. Rock Auto has...
Greetings. Quite unexpected I ended up with a 92 Ranger 4x4 XLT in almost unbelievable condition and unbeatable price. Low miles, clean, never damaged, bone stock from factory, and probably never used as 4x4 is meant to be used. It is tight, not a rattle, squeak, grind or whine anywhere! I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.