ignition coil

accidentally posted to introduce yourself whoops don’t know if that matters but reposting just incase. 91 ranger was leaking oil out of every gasket on the engine (except the internals). i had pulled the motor out to do a full service ( new crank, oil pump, camshaft gaskets , water pump...

21 years old learning how to work on my ranger. my 91 ranger was leaking oil out of every gasket on the engine (except the internals). i had pulled the motor out to do a full service ( new crank, oil pump, camshaft gaskets , water pump, thermostat, intake and exhaust gaskets, new rear main...

I have a 2005 Ranger that only runs on cylinders 1 & 4. This problem came from the truck sitting for a few years but it worked before it was parked. I have done everything I can think of to try and diagnose the problem. It threw a P0351 code which is Ignition Coil A Primary/Secondary Circuit...

Hello! So I recently picked up a 1985 Ford bronco 2 2.8l v6 as more of a project vehicle I can learn from. Either way, used to run, but now it doesn't after I gave it a tuneup lol so I'm trying to track down what got it not starting, So, I've checked for spark on sparkplugs got em, got...

I just bought an 88 Ford Ranger XLT 4x4 Automatic (2.9) When I bought it on Wednesday it ran really well. I decided I was still going to change the oil, transmission fluid, filters, and ignition coil. (They replaced everything else.. wires, distributor, plugs) but left the old coil. I did all...

I have an 85 ranger 2wd with the 2.3L in it and I've been having problems with it for awhile. It was running good and then all of a sudden it started spitting and sputter, so I changed the plugs, wires with motorcraft, and replaced the IAC, it ran good for a day or two and started acting up...