2000 ford ranger

Hey guys, As long as ive owned my ranger every time the AC compressor would kick on while the truck was in drive the truck would jump forward a bit. I ended up having to replace my IAC and when i did the initial idle re-learn process i had the AC on which caused the computer to over compensate...

Hey guys so over a month ago I turned on my 2000 Ford ranger 2.5 and it was just misfiring so I changed all 8 spark plugs and all 8 spark plug wires and nothing, I changed the coil pack closest to the back since there wasn’t spark on cylinder 4 and nothing. So I check my catalytic converter...

I have a 2000 ranger xlt extended cab. The driver seat is totally broken out. I was wondering what seats can be interchanged with it.

So I'm building a turbo 2000 Ranger and decided to tune it with Moates's Quarterhorse J3 chip. To use the TunerPro RT software (to do real-time tuning), I need the .bin file from a 98-2000 3.0 Flex ECU, as well as the .xdf (base tune file?), which I think I have, and .adx files. If someone knew...

I have a cracked driver side Cylinders (4,5 and 6) head (2000 Ranger XLT 3.0 flex rear wheel drive AKA 4X2 I have ordered a replacement head, but I still have worries that their is a left and right side head. I have a local mechanic who will be doing the installation. I need to know if if the...

ive got a melted section of wires in my engine wire harness. its in a spot where alot of different wires are routed together, mechanic has told me its unrepairable and i need a new complete one. getting a new one from ford doesnt seem to be a real option, crazy expensive, so im seeking a used...

I have 2000 ranger xlt 2wd and Im doing the 5.0 swap with a 99 eddie bauer awd donor. the donor has minor front end collision damage and has 61xxx miles on it. I also have a limited access to a 95 mustang for small parts, and a 88 fox body jasper auto trans. I plan on doing a basic plug and...

Hey yall, i have a 2000 ford ranger, i have a parasitic draw problem. I ran the test and im pulling a 1/4 amp after they key is off and out of the ignition there is no lights on and i checked for voltage at each fuse and narrowed it down to the right one. When i pull out fuse 26 the draw dies...

Hey yall, i have a 2000 ford ranger, i have a parasitic draw problem. I ran the test and im pulling a 1/4 amp after they key is off and out of the ignition there is no lights on and i checked for voltage at each fuse and narrowed it down to the right one. When i pull out fuse 26 the draw dies...