m50d

Hello! I'm pretty new here, so I hope I'm posting in the correct thread. TLDR: A4ld went out, want to find a M5OD to swap in. Skip to the "CONCLUSION" if you don't want the full story. I was given a 1990 Bronco II by my Grandpa, it's sort of been a family vehicle for a long time. I drove it...

So I did a auto to manual trans swap. The manual trans is from an 01 my truck is a 99. I adapted the 99s wiring harness to plug in with the manual. I also Swapped in the ecu from the 01. After all this the truck doesn't try to start at all. If anyone knows away to solve this it would be greatly...

I need to change my tranny fluid. Looks/smells like the previous owner filled it with gear oil rather than ATF(it's leaking from the shift rail plugs). The fill plug is totally mangled and torqued on there like crazy. I don't have the tools or money to pay someone to remove it. Is the small bolt...

Lets starts off by saying thank you to everyone who's helped put up the tech sections. it's been invaluable to my in my b4000 build. however I may have found something that doesn't exist. A mismatched M50D HD It maybe an R1 or it may be an HD, there's evidence that leads either way. I found it...

My shifter has been really lose for a while now and now that I got my truck driving again, I ordered the parts to replace the bushings but I can't for the life of me figure out how to remove these stupid allignmen t pins so I can install the bushings and washers correctly. Please and thank you...

Hi, I am in need of a new clutch for my 89 ranger 2.3 with an m5r1 trans. however due to the lack of funds i am considering going to the junk yard and trying to find a donor vehicle with low miles. Ive read that all 88 and on 2.3s use the m5r1 trans and was wondering if the clutch components...