• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

clicking noise


  1. The_Epsicle

    Mushroomed pushrods, valve noise...

    I took my valve cover off awhile ago because I had valve tapping and I readjusted my pushrods, but I now realize my pushrods where mushroomed at the top and bottom and that isn't normal. I still have a really bad tapping noise that kind of comes and goes while driving I assumed a lifter after...
  2. 1990 Ranger 2.3L Clicking Sound After Rebuild

    Hi there Ranger Station! Long time reader, first time writer. I recently finished rebuilding my 1990 2.3L 4cy engine for my ranger. I had a clogged oil pickup tube screen that just ruined a perfectly good, running engine. I took the block to a machine shop, had it bored, honed, and boiled...
  3. AC compressor clicking

    Looking for some advice. I have a few questions, all AC related. It will be a little long winded, so I thank you if you make it all the way through. The compressor on my 2002 Ranger (175K miles) has a steady clicking sound when the clutch is engaged and the truck is at idle. When I rev the...
  4. 982WDRanger

    Clicking Noise, No Start?

    So I finished up beefing my tract-bar mounts today, tightened down all my suspension components and was going to take her out on a trail to she how she goes since I just did my first SAS. Got in and turned the key, nothing.....tried again....nothing. Had no lights, dash lights, check engine...
  5. Very weird! Needs jumped, won't shut off once started, flashing int/ext lights

    Hi all... Weird problem. 1998 Ranger Sport 6-cyl, 3.0 2WD, Auto 150K miles approx. Ok, prior to today, truck has run fine, battery seemed healthy at 2 years old, starter has always kicked through with vigor, and my gauges have given me no indication there is anything wrong with the charging...


Top