• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results

  1. misfire at/around 3000 rpm

    The computer went out again. Pip signal into the computer was nice square wave but the spark out was pure shredded noise.
  2. Misfire update, 1989 Computer bad.

    Maybe jumping off the old beast is killing the computer. I only run it a few months out of the year. Of course, putting out for a new computer is out of the question, there is one company that does but its very expensive. Its times like this I like Dodge and Chevy as they kept recycling their...
  3. Misfire update, 1989 Computer bad.

    Welp Yep Nope Borrowed an oscilliscope, PIP signal going to computer is a nice even pulse wave, Spark output coming from computer is pure shredded wheat. I guess it killed another one.
  4. Misfire update, 1989 Computer bad.

    The Ranger will run pretty well with the Spout connector undone, but misfires grossly when the spout signal is present. I ran new wires for the pip signal and spout signal from the TFI to the computer. In doing this I am able to backprobe it while its running. I would think that if it runs well...
  5. misfire at/around 3000 rpm

    I can try that tomorrow. I wasn't thinking it was valvetrain as the tach quickly jumps around when it screws up, which made me think the spark was dropping out as the tach is run directly off the coil. EDIT my apologies, the tach is run off of the TFI, the tach and coil trigger share the same...
  6. misfire at/around 3000 rpm

    Fuel pressure is where it should be according to the gauge I have, just in case I made sure to replace the fuel delivery system and the numbers really didn't change. It will misfire under no load as well. Its harder to tell but definitely does it. I can entertain the idea that this maybe a...
  7. misfire at/around 3000 rpm

    I fixed all the Vac leaks, but it ran fine with a bunch of vacuum leaks last year. Cant test compression but I think its probably fine, not usually something that suddenly changes I would think. Truck ran strong last year, no oil burning or blow by, and got 21mpg on the highway on a long trip...
  8. misfire at/around 3000 rpm

    I posed this on a different ranger forum, fixed some other issues based on the replies(Thx, RonD) but not the main issue, so perhaps I can get some fresh eyes on the problem It is a misfire or intermittent lack of fire around 3000 rpm. The tach drops when it happens. I have replaced Coil, Fuel...
  9. Hello Everyone

    I have a Ranger and it is a basket case but maybe I can learn and help others while I am here. I seem to have a penchant for buying cars that always have a single problem that can't be solved by anybody but maybe my luck'll turn around this year.

Sponsored Ad


Sponsored Ad

Top