Taking camber out of Twin I-Beam after 2" lift (1987 Ranger RWD)

[Locotomb]

Sorry been busy, thought id post a preview.

 

[Locotomb]

Sorry, It took so long to get this done. I have all the modeling done and a picture you can get measurements from. Hopefully you can weld. If you have a way to view 3d .obj files and if you have a drive account, I will send it to ya.

 

[Locotomb]

You’re more than generous. Thank you, I appreciate your help! I was wondering why the handling felt off after the camber had been taken out. Looking forward to having this truck complete!

kk

 

[Seandeez21]

Later tonight I will 3D model some. You will be able to view them on 3dpaint on windows 10. Unless you have 3ds Max or similar. I used 1/4 inch plate for everything. I'll try to add templates for all your holes and cuts as well. It might be a couple of days. I'll be back when I'm done.

Would you mins sharing these?

 

[Samzwell]

kk

Locotomb I'm so sorry, Man! I never got the notification of your response and didn't want to bother you or feel pushy by asking about your progress! I will message you my email for my drive account. I have access to a welder and plenty of material. Thanks so much for investing the time to model it for me! Looks like Seandeez21 will benefit from it too.

 

[Locotomb]

Locotomb I'm so sorry, Man! I never got the notification of your response and didn't want to bother you or feel pushy by asking about your progress! I will message you my email for my drive account. I have access to a welder and plenty of material. Thanks so much for investing the time to model it for me! Looks like Seandeez21 will benefit from it too.

Hey, I haven’t checked until now either but yeah I get em done. Both of you pm me your email that can accept files. Google, Drive is what I use. If anyone else wants em tell them to pm me. And please don’t give them to anyone else unless they are a real life friend of yours. It took me some time to model them. I haven’t done the templates yet but that can be done.

 

[Rangerchuck93]

Sorry, It took so long to get this done. I have all the modeling done and a picture you can get measurements from. Hopefully you can weld. If you have a way to view 3d .obj files and if you have a drive account, I will send it to ya.

Sorry to revive an old post but I’ve been searching the internet for axle pivot drop brackets for my 97 2wd ranger. I am wondering how many people have used these plans and what springs they used with them. I would also be interested in trying these if the drawings are still available.