Extended Radius Arms

[guzzirider]

Can you install the Skyjacker extended radius arms on a truck that has the Skyjacker leveling springs?

 

[chrwilkins30]

i would say no because they show them for 4-6inch lifts. duff has them for i think 2 1/2in lifts IIRC. call them and see what they can do for you

 

[railman]

you could, but the camber would be way off....

l8r, John

 

[legoms013]

I'm not exctly sure if you can or cannot, but I see no reason why anybody should.

And it would be sort of a waste as the leveling coils wouldn't really allow the arms to work to their full potential. Not enough travel out of the leveling coils to make it worth your while.

 

[chrwilkins30]

if anything buy those RA extenders and build a new mounts.

 

[dave@threat]

you could, but the camber would be way off....

l8r, John

The camber would be off???

 

[legoms013]

The camber would be off???

I'm not clear on it either


Maybe because Skyjacker's arms mount farther back down the frame rail and at a lower elevation compared to the stock mounts, coupled with the relatively short leveling coils wouldn't allow the arms to sit where they would normally be with a 4" lift.

 

[Sasquatch_Ryda]

Thinking he meant caster....

 

[railman]

Thinking he meant caster....

bingo....was late so I had a brain fart.....

l8r, John