Military Mazda B4000 Bulls Build

[Boggin]

how wide are your boggers? they just dont look right lol

 

[bull90]

there 11" wide.

im having some vibrations in my drive line. too.....

a few weeks ago i had my U-join slip out of my yoke on my transfercase, not sure why.. i think it was due to missing c-clip over the u-joint cap. drive shaft whole... on the hwy...

lucky me no damage was done i put her in 4x4 drove home in FWD and got the new joints in.

but again last week i was about to go out and i heard a clunking sound. my bolts on my yoke connect to the transfer-case managed to wiggle out and BANG had my truck in the middle of the road disabled. got some new bolts put her back 2gether.. still whyyy am i getting these vibs!!! driving me nuts

in a month i had my drive shaft blow out twice.. but no damage to the shaft.... maybe time for a new shaft??? i didnt want to get one till i got my doubler.... but apparently my drive angle is way too much for the doubler. dunno what to do

it got cold all of a sudden was gonna paint my bed but that idea went down hill..
should have new pics this weekend should be interesting!

 

[-Nathan-]

what does your pinion/driveshaft/tcase angles look like? maybe you need a CV at the tcase end of the driveshaft.

 

[bull90]

not sure what its at.. ill ask my mech.
but i think i was told 11 deggree's but this is without a Cardon Joint. soo maybe with the doubler and a double cardon i should be fine. jeeps have wayy more retarded angles lol

 

[bull90]

 

[bull90]

Rainy Sat Strut in my backyard.

 

[Bennybooster]

looks good, did you get a new bogger?

 

[bull90]

oh yeah

 

[crazywhiteboy]

anymore detailed specs on the swap?
coilover spring rates?
gearing?
locker/welded?
more detailed pic/measurments of the 3 and 4 link?
length of lowers and uppers?
pics of suspension mounts?

looking for some detailed info, i looking into doing basically the same setup, without the truggy look. what year truck were your axles from?

 

[Josh40601]

Don't you already have a bad ass SFA Ranger CWB?

 

[crazywhiteboy]

Don't you already have a bad ass SFA Ranger CWB?

uhhhh what? lol

 

[Josh40601]

Solid Front Axle Ranger, Crazy White Boy....

 

[bull90]

anymore detailed specs on the swap? Swap done by www.nickel4x4.com
coilover spring rates?300/300
gearing? 4.10
locker/welded? welded rear open front
more detailed pic/measurments of the 3 and 4 link? no clue and im not giving Nickel4x4's secrets!
length of lowers and uppers?they are all the same for easy replacements
pics of suspension mounts? they are in the thread
what year truck were your axles from? 1996 F3504x4


im not the fabricator. im no welder all i do is DRIVE!

im a heavy equipment operator. and all i wanna do in life is drive i dont want to know what it takes to build a crazy machine.. why because i have mine already

 

[crazywhiteboy]

i dont want to know what it takes to build a crazy machine.. why because i have mine already

lmfao....good answer!

 

[crazywhiteboy]

Solid Front Axle Ranger, Crazy White Boy....

lol. that went right over my head. yea i still have my truck, and yes i think its pretty badass, but there is soooo much room for improvement. my d44 and 9inch have been good soo far(2500miles/3months or so), but i want one tons and 40s. i figured id either a) sell the half tons for as much as i could, or b) keep them for the wifes exploder which will become my dd soon as i get her a new vehicle to drive.