• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Looking at a 2-3" drop


Wicked13

Well-Known Member
Joined
Apr 22, 2011
Messages
69
City
03045
Vehicle Year
1998
Transmission
Automatic
Is DJM the only way to go? I know there are other products out there, but this seems to be the most common kit that's talked about on here. Before anyone says it, no, I am not going to a 4/5. I don't like the way trucks look that low. I'm just looking to get the weight of the truck closer to the road. I've had cars since I passed my drivers exam and I prefer that, but having a truck makes more sense in my life right now.

I guess I'm looking for opinions on other kits (or safe and functional diy set ups) for lowering the truck a bit.
 
Take a look on some truck sites see what's out there but i personally run the DJM 4/5 and the way the company did the kit is top notch. Everything is built the right way and truck rides like it did stock. They may not be the only manufacturer but they seem to be the leader in kits for rangers. I've heard of springtech for off road but idk if they do lowering kits. Maybe hit Ebay and see what pops up. Which ever way you go, just do your research, but my vote is DJM. :icon_thumby:
 
You can go real cheap & just cut 1 & 1/2 coils off each front spring....but the ride is rough.....

or you can buy 3" drop coil springs....but the ride is almost as rough...


or you can buy DJM's or another set of beams that's out there.....I forget the manufacturer's name.....and get a factory ride....(I went the cut-spring route for 2 years & am now ready for a SMOOTH ride.....LOL
 
Does someone have a picture of these beams installed? I thought beams couldn't be used with coil springs.
 
Does someone have a picture of these beams installed? I thought beams couldn't be used with coil springs.
Click to expand...

What? Beams only ever came with coil springs. What year is your truck?
 
3.0ranger1227 said:
What? Beams only ever came with coil springs. What year is your truck?
Click to expand...

Not that it means anything here but the 50ttb was leaf sprung from its beginning to its end.... Just sayin
 
yours is a 99 which means you have upper and Lower A-arms. With just a 2/3 drop via springs and a flip kit it will ride really rough. Also with just 2" drop springs you alignment is not going to be perfect. You should really think about the 4/5 it rides really nice and it's not too low that you can't go anywhere. Here's a little motivation to go 4/5
DSC_0502.jpg
 
4/5 drop gets me almost anywhere! even out to the dunes or up north!
DSCF1676.jpg


not as low as it sounds, also didn't relize your ranger was a a-arm suspension, mine was beamed which is why i went DJM
DSCF1609.jpg


:icon_cheers:
 
To those of you who posted photos, what size tires are you running? Maybe it's the photo on DJM's site, but your trucks don't look as low. Anyone live in NH or MA so I could see this in person? :)
 
I'm running 245/40 18's
 
i believe 245/45 18's but let me double check that. mine has a chevy lowering shackle on rear so it would raise it an inch just so mine sat level. rear looked a little too low with 5 drop. Sorry i'm in AZ. If your ever out here its here haha
 
I did the same thing, so technically it's a 4/4 drop lol
 
Wicked13 said:
To those of you who posted photos, what size tires are you running? Maybe it's the photo on DJM's site, but your trucks don't look as low. Anyone live in NH or MA so I could see this in person? :)
Click to expand...

Keep in mind there that DJM is trying to sell a lowering kit. It is in there best interest for the trucks in the pics to look as low as possible for the give lift.
 
Does anyone have a photo of there truck next to a Colorado Extreme/ZQ8? Or have you been next to one and noticed it's higher or lower (or the same)? My father has one and that would give me a really nice picture of how the ranger would look.
 
You must log in or register to reply here.

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_0790.jpeg
20250606_193025.jpg
20250717_161404.jpg
2f30d2e5-a0b6-4419-bb34-5c120604fb82.jpg
IMG_0673.jpeg
IMG_0675.jpeg
IMG_0671.jpeg
85 ranger
85 Ford Ranger
PXL_20250409_152004355.jpg
IMG_9440.jpeg
IMG_4799.jpeg

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top