As the title states... I want to cut off the rusted and leaking flange joint off the end of the cat and weld in a straight connector and be done with it and if it is a double wall, would I have issues doing it the way I want to?
Edit: I have an 03 with a 3.0.
OnePlus One | Powered by: Euphoria...
I figured since it's not a repair question, I'd ask here...
So does the 5R44E start in 2nd gear if its in 2nd on the shifter? If not, could I mod it to?
GS³: CyanideL + ShiftKernel Edition™
ギミチョコ!!
Seems like the throttle on my 03 whistles in the morning when its really cold after its been sitting overnight. It only does it cruising steadily at 45-55mph with the throttle barely open. Let off the throttle or open the throttle more and it goes away. It does this until the engine warms up. I...
Anybody do something like this? Like change the backlighting color on a cluster with orange needles? I just bough a 03 that has the orange needles and I wanna change the gauge backlighting bad, I got used to the blue from my previous truck. Lol
GS³: CarbonROM + leanKernel Edition™
ギミチョコ!!
I just put in new door switches. I noticed when opening the drivers door that there is a delay in the light turning off. Is this how the GEM controls the light? This ain't a technical question. Just out of curiosity.
Sent from my iPhone using Tapatalk
I'm trying to diagnose an a/c issue where the a/c goes to defrost when I accelerate. I noticed when going through the vaccum lines that my outside/recirculate door motor does not work. The door is not open when the knob is on Max A/C. I pulled off the vacuum line and the vacuum seems pretty weak...
I used to DD a 4.0. Got decent gas mileage for what it was. Had over 220k and the tail pipe is clean. It does leak oil but not bad enough to the point where I have to add between oil changes. The 2.3 I have now gets really good gas mileage and seems to run pretty good despite the fact that it...
I was taking a good look at my truck today. Noticed that the front part of the cab looks like it is pushed over on the frame. Like it is not centered on the frame. The bed looks center on the frame but it's only seems like it's only from the grille to the rear of the front fender. It doesn't...
Quick rundown of the truck:
- 1995 XLT
- 2.3l, 5 spd manual, 2wd
- Air conditioning (working)
- Power steering
- has aftermarket CD player in it
- sliding rear window
- has bed topper
- 15" Explorer rims on it w/ 215/75/15 all season tires
I recently put two new headlight housings on it and...
To any of you who painted your radio bezel on your 95+ style dashes, did you remove the coating on the plastic before you painted or did you just scuff and shoot paint? Would it be a good idea to use an adhesion promoter on all of the plastic before painting as well?
My 95's ashtray doesn't come out when I pull on it. Were they available as a option or standard on all trucks? I just ask because either I'm stupid and don't know how to operate the ashtray on the newer style dash or it doesn't have one.
My ABS is on. I pulled the fuse for the power to the ABS module. Light stayed on. But got dimmer. Everytime I step on the brake pedal, the light gets brighter. Now I'm really confused. I also found out that someone put a 30 amp fuse where a 15 amp fuse at the #13 fuse spot in the I/P box is...
I just bought a truck and recently found out that the exhaust joint connecting the cats to the rest of the exhaust pipe is leaking. It looks like I maybe able to just replace the gasket and hardware. In the event that I find that there is more wrong than that, is there a good way to replace the...
Does it really work? Not that I won't do it if it doesn't. I did some research and apparently it works for almost everybody who has tried it on their 4 bangers.
That makes three. I just bought a '95 XLT regular cab in white. It has a 2.3l with a 5 spd and it is 2wd. Has a willow green interior. Came with a topper but I'm debating on removing it. Truck does have some quirks though. The passenger side headlight isn't sitting right in the header panel and...
I have a snow blower that ain't running right. After it gets warm, it will idle fine. But when you try to run the auger, the engine quits. The engine seems to start okay and idle okay. It's just when the engine is warm and when a load is applied. As I don't know much about carb'ed engines in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.