Recent content by HondaEater

Delete admin

Just wanted some opinions from the members on the forum about which SkyJacker kit I should purchase. Rig is an 88 X-Cab with Dual tank option. I'm currently on a 3 inch body lift and 33" KM1s. I plan on running 35" MTRs on 15x8 Soft 8s. My 2.9 is freshly rebuilt with 6k on it and I'm going to be...

Lost the keys for my 88 but the doirs were unlocked. Been attempting to drill the ignition lock cylinder out of the column, and the pin is drilled out but the cylinder won't come out. What am I missing?

It doesn't seem to want to do much, it's the lumbar style seats (1st gen) anyways, i don't really have much choice in seat position, it only slides forward/backward about 2 inches in each direction (my bronco 2 has wayyy more adjustment) and the seat will not fold completely forward to allow...

i ordered a new slave for my truck today from napa through the parts department at the dealer i work for...it got here and it looks nothing like the napa one's i've seen guys running here on the TRS, it looks exactly like the cheap POS autozone one i bought and that i'm having trouble with...

Anyone running them? Good experiences? Bad Ones? I've got a brand new one in my truck with 500 miles on it and it's leaking! It's under warranty, but i don't wanna replace it if it's not going to hold..and i'm going to have to rip the tranny out AGAIN because i reused duralast parts. Just wanna...

i've got a rear with 3.73s in my bronco 2 but the dana 28 still has the factory 3.45's. my buddy is telling me all i have to do is use the ring from the 3.73 setup he had in his old d28 (before he went to 4.10s), he states the pinon is the same. can anyone chime in on this? i dont wanna f my...

I need to find exhaust manifold to head bolts for my 2.9 rebuild i've used the search feature on the forums and have found little information, on most posts, people were asking about mani to y pipe studs http://www.therangerstation.com/forums/showthread.php?t=72549 none of those part numbers...

My 2.9 is idling at 1500 rpms, I checked the throttle cable and throttle body, I took the iac off and cleaned it with bg intake and throttle cleaner, I've checked for vacuum hoses leaking/cracked, I don't see anything out of the ordinary, someone point me in the right direction? I also...

:bawling:how likely is it that the block is warped as well?:bawling:

any ideas, seafoam maybe?

did the valve covers on my ranger a week ago and the truck ran fine. Haven't started it since then and went to start it today, no dice. I don't hear either of the two fuel pumps (dual tank ranger) priming, I hit the rest button on the inertia switch and still no dice, ideas?

Took the valvecover off my 2.9 and this is what I found. :(

I want to run my buddies 33s (bfgoodwrench km1s) on my 88 ranger (first gen) but I only have a 3 inch body lift, any ideas for extra clearance for cheap without having to cut the front fenders, first gens are getting rare (especially my dual tank 5 speed manual tcase power everything!) So I...

I was rushing to get my new clutch in and forgot to put the inspection plate in. The Starte. is grinding everytime I start the truck. Does that plate act as a shim or guidance for alignment of the starter? I haven't had a chance to look at the flywheel yet, but im not sure if I should try to...