Recent content by Damon Toth

would you want to sell the steering knuckles, if so how much. Located in Costa Mesa 92626

would you want to sell the steering knuckles?

I am looking for bolt on caliper steering knuckles or complete axle if you do not want to separate. Thanks Text 949 683 5604

I have a set, do you need both sides?

Sorry I do not.

yes, mine is leaking at the front where the protective cover attaches to the tank insert. Thanks for the replies.

My 1989 poly tank is leaking on the front side closest to the transfercase and needs to be replaced, no one makes a replacement tank past 1988 metal ones. 1. will the 1988 metal replacement tank work with the 1989 sending unit/pump and will the tank straps work as well? 2. Or will a newer...

In need of a Dana 35 Passenger beam housing in good shape no cracks. Thanks,

Thank you for the information. I have a set of James Duff drop pivot brackets for the 3" kit and the drive side is 8 1/4" and has the STX added gusset that mounts to the outside of the frame. I am going to use them, If they fail then I will get the Autofab pivots.

Thanks, I would really appreciate it. It is funny with all the information about the SXT HighRider lift there are no true dimensions of stock and the STX Pivots.

Even if someone has the dimension of the stock bracket, I am just trying to figure out what I have. Thanks

So on the passenger frame rail is the driver beam pivot, from the bottom of the frame rail to the pivot bolt center is what I am looking for, mine measures 6 1/2" and I thought I had STX brackets. I called Autofab and said his were 8 1/2" and his are the same as the original STX Pivots. I will...

Can someone please provide a dimension for the driver beam pivot that is on the passenger frame rail from the frame to the pivot bolt for a STX pivot. I have searched and there are a lot of photos but none with dimensions. Thanks,

I have a Dana 28 TTB 3.73 gears hub to hub $125.00, Ford 7.5 LS3.73 $125.00, Supercab rear drive shaft 1210 series with newer u-joint and carrier bearing $100.00, axles and drive shaft have 170,000 miles. Skyjacker 134 rear leaf springs $125, New Dana 35 TTB Lock-Right 2310-LR with correct...