Recent content by clifford97

with the summer heat upon us i decided to fab up some half doors.:icon_welder: i say 2.0 because i started a set a few years ago an they mysteriously disappeared last summer. no worries, i can Re-build them, BETTER, STRONGER, (probably wont make me go) FASTER!! anyway picked up a set n finally...

im redoing my rear suspension and got a set of exploder leafs but one of the bolts is seized to the sleeve in the bushing. i got it to come out a little bit but now it wont come out any further due to the rubber absorbing the shock from my hammer. had this happen once with a shock bushing but i...

hey i know this is a dumb question but like i said i need to confirm quickly, can give an explanation later but here is it is.. currently running 33X12.50, if i keep off 4x4 stick with only road driving on 2wd hubs unlocked can i run 33X10.50's up front? same height but different width. i...

did a quick search couldn't find a thread like this. just wondering what is in you bug out bag/SHTF or even just your emergency kit in your truck or home. give and get ideas. as of right now my bag is also my hiking back pack and gear. which right now is a jansport exo frame i also have two...

yep your math is good on that one. roughly 30cents per round. BUT if you really want to get technical on the total cost of self loading, start factoring in the equipment needed to do so, scale, press etc and see how much of each load or an average of what you usually produce (mixed calibers)...

unless there is a typo, $25.00 for 50 casings = out to $.50 a piece. bringing your total to around $1.02 a round, still cheaper but not 3:1. didn't mean to be an ass, i just saw it and it didnt make "cents":icon_thumby:

anybody put rear facing lights on their truck w/o a light barroll bar etc. ? i bought a set of driving lights that i wanted to use as reverse/bed/aux lighting. i want them high enough so i can see the inside of my bed, can't put them on top for fear of low branches ripping them off. w/o any...

im thinking about getting into some small scale plowing, just like neighbors driveways and whatnot. found a plow for a ranger the guy wanted 1600 for the full set up but its all steel, ive read that a poly/fiberglass plow would be better for a ranger especially a 3.0 like mine. but im not sure...

finnaly got up to maine for the week, and forthe first 3 hrs i havent seen so many rangers in one place besides a meet. so i Figured SOMBODY has to be on the forums, just wondering if anybody is around the lake sabago area, ill be here for the week and would like to meet with somebody on here...

i need to do some wheelin or something in my truck ASAP before i do something stupid.. like buy a.. a.....vw :shok: my step dad just got a 96 gti and now he wants to sell it. well ive been driving it around and lets just say i love TURBO!!:3gears::yahoo:

right now i have a 4" lift with drop brackets in the front and block in the rear. my rear leafs were sagging so im going to put ex leafs along with a set of longer shackles. depending on how it sat i was thinking about either putting a spacer in the front or 6" coils, then it dawned on me " do i...

posted this up on frf figured i might put it here see what u guys think. went out by myself (ikno its stupid) after a meet n greet. had my girls camera in the truck so i figured id try to take atleast 1 vid.

on my way home from work i was thinking about the mod to secure the hubs to the rotors, and then i thought would it hurt to put a little hi temp scilicone on the hub to help keep water and mud out of the hub? or would that harm the hub or rotor? i figured it could also help hold the hub to the...

:annoyed:im so F**ING jelous right now.. i hate all of you :icon_rofl: i wish i had time money and tools to do this to my truck..

Free.99!!