Surely...
Move your seat all the way back and look at the top part of your gas petal. You'll need a flashlight for this. Now, move the gas petal up. (opposite direction of when you mash it down to accelerate) You'll see a cable with a spring on the outside part of the upper part of the gas petal. Pull the cable toward you.
Now, if there's a gap between the spring and the gas petal, this is where you'll want to put the zip-ties. What you're going to do is wrap the zip-ties tightly around the bare cable. This will take up the slack in the throttle cable. I was able to fit three zip-ties in mine.
Now that you've read this, go under your truck and take a looksie.