wheel bolt pattern for ford ranger 84

[jammert609@yahoo.com]

Ive had my truck almosted a year know an i have no clue what the bolt pattern for my wheels are, I had herd 90s mustang gt wheels will work? whats the price for a set of them in 17 inch?

 

[MountainMike]

Your bolt pattern is 5x4.5". There's lots of info in the tech library for these kind of questions, I recommend taking a read.

http://www.therangerstation.com/tech_library/index.php

 

[bttlscrs00x]

I know 90s Fox mustang STOCK wheels won't work.. They're 4-bolt patterns.

 

[85_Ranger4x4]

I know 90s Fox mustang STOCK wheels won't work.. They're 4-bolt patterns.

I think most foxes 79-93 are four lug. There are some oddball ones that are five lug but I don't know how they compare to a Ranger.

 

[bttlscrs00x]

I think most foxes 79-93 are four lug. There are some oddball ones that are five lug but I don't know how they compare to a Ranger.

I was talking specifically about his reference to 90s mustangs.. I don't think there were at 5-lug Foxes (I'd have to check into it). As far as I know, they were 5-lug conversions.

Something else you (OP) need to realize... When you say 90s Mustang, there were 2 different generations of Mustangs in the 90s. You have the Foxes that went until 1993 and 4th gen (SN-95 that went 1994-1998, New Edge 1999-2004)

 

[85_Ranger4x4]

I was talking specifically about his reference to 90s mustangs.. I don't think there were at 5-lug Foxes (I'd have to check into it). As far as I know, they were 5-lug conversions.

Either the SVO's or Cobras were 5 lug, maybe both. I am not the biggest foxbody fan but I know some were 5 and they are pretty few and far between.

 

[JPRanger03]

84 - 86 SVO wheels were 5 lug, as were the 93 Cobra R's and S/N 95 Mustangs. I'm not sure about the offset of the wheels though, in comparison to Ranger wheels

 

[adsm08]

The offset is wrong. It works, but you may rub a bit with the wrong sized tires. The rims are roughly the same width, but the Ranger's hub face is near the middle while most Mustang rims have the hub face further outboard.


I saw a Gen 4 Ranger with similar year Mustang rims on it and it had full turn without rub, but I think it had 205/75s on it.

I also saw a B2 with the 3-spoke Mustang rims from the mid to late 90s. Only ever saw it parked, so I can't speak about rub issues.