vacuum module?


baddmove

15+ Year Member

Joined
Jun 5, 2008
Messages
14
Points
3,101
City
Pullman,WA
Vehicle Year
1989
Transmission
Automatic
on a B II.89.AT....where is it located?? i think mine is going out as the truck has to warm up for it to shift into drive.. just started doing this the other day..i did a fluid/filter change and used Lucas, but it still takes about 5 mins before it will shift into drive..i am running in second gear until it does go into drive....
 
Passenger side under a cover next to the catalytic convertor. Them are fum.
 
what do you mean "under a cover" is there a cover on the tranny? or on the floorboard?
 
what do you mean "under a cover" is there a cover on the tranny? or on the floorboard?

Should be a cover more like a shield on the passenger side of the trans somewhat shielding it from the heat of the cats. Under that cover/shield will be your modulator for your transmission.
 
mine didnt have a shield but its in that spot above the cat, good luck if you dont have a body lift
 
Its easy once you have the cover off google image the modulator on a tranny and then u can tell where to look. prolly take ya 20 mins :P
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top