transmission mount

[Orphanater]

I need to replace my transmission mount and I was wondering if there is any better ones than the factory replacement.

 

[alnvilma]

I have one from a 1993 M50D. You can have it for shipping cost.

 

[Natedog]

I bought a stock replacement at NAPA auto parts the other day for $20....looked about the same...too bad it's made in f***in India and not USA...skeptical how long it will last.

 

[Totalled]

1986 and later can use the same urethane mount that is sold for 5.0 mustangs.

 

[4x4junkie]

This is one of those parts...

BUY IT AT THE FORD DEALER!

Yes, the ones from anywhere else just plain suck. You get about 6 months to a year at the most before the rubber part separates away from the metal (not sure about those urethane ones though).

 

[Quasi242]

Resurrecting an old thread but I wanted to add my opinion. I bought a replacement tranny mount from Parts +. Mount has lasted less than a week and the rubber has separated from the metal on both sides. Looks like I will be doing the mount swap again this week with a factory part .

 

[pcollins]

yea, buy the ford part. I wrongly put a new tranny mount in from parts master (thought old one was bad, it isn't) and its holding up worse than the OEM one. i kept my stock seeing as i'll probably be putting it back in within a month...

 

[adsm08]

I bought a used trans from a 91 Explorer. Put it in with it's original mount that was still good. It replaced my original trans mount from 1987 that was also still good.