To RhinoLine Or Not?

[MAKG]

Ohhhh that still never gets old. Think anyone will ever forget that one?

Not in a million years.

For those who haven't seen it yet:
http://www.explorerforum.com/forums/showthread.php?threadid=18595&pagenumber=1

 

[photoduo]

I found Durabak to be great stuff.....once again, it's all in the prep, but this stuff is unbeatable.......i have personally used it in marine applications and it lasts forever..........check out the links for some pics of trucks done with the stuff........
http://www.nonslipcoating.com/scratchguard.htm
http://www.nonslipcoating.com/automotive2.htm

 

[RENTHAL74]

+1 on durabak, I also routed my wires under the cab. mine were only for the dome light anyhow.
http://c4.ac-images.myspacecdn.com/images01/5/m_3917ef20baecb8ba3d7d796b47886523.jpg

 

[4x4fun]

i did it in my geo i got 1'' flex con. and fix it to the floor. and lined it too. i like huruliner its easy to add to and repair if you had to grind some off to weld or something and the big pro and con to spraying is $$$$$ vs the same result.

 

[85_Ranger4x4]

If the wires are properly insulated...I mean no cracks, or anything. is it feasible to drill and route any wires under the cab(outside)? And is it possible to locate them so they arent exposed to possible friction damage...IE crawling across a big rock and cutting/pinching the wires to death?

If they are outside the frame I would worry about gravel beating them to a pulp, but not everybody has to deal with that.

The only wires I have going to the back of my cab are my speakers, I routed them under the aluminum sillplate along the bottom of the door.