Throttle linkage for V-8 swap??

[greasemonkey01]

Ok, so here's the skinny on my swap. Its in the very early stages but its going to be a carbed 302, C-6 and NP205. They are going into a 90 B2. I have pretty much everything I need except I'm not sure on what to do for throttle linkage because of the cable setup the 2.9 had. I was thinking a throttle setup out of an older 2.8 carbed B2 but any pics or info would be great. Thanks.

 

[Totalled]

Stock 85 2.8...

 

[greasemonkey01]

cool, thats exactly what I'm looking for. Thanks.

 

[frank91lx]

You can also use an 84-85 Mustang cable also. The firewall and pedal mounts are the same.

 

[88mudder]

carbed Ranger cables work great as well... mines on a 84.

 

[sloue]

made mine out of 1/4 plate aluminum drilled o hole to fit cable and made a retainer clip for the back works like a charm . stock cabel,83. the only pic and i lost my camera

 

[red85]

I bit the bullet and bought the Lokar kit for my 85. I had made up a plate of stainless initially, but the Lokar stuff fit so well that stuff is now sitting on the shelf.