tfi module

[arizonadirtslinger]

do i have to remove my distributor or can i replace the module without removing the distributor

 

[spdcrazy]

can easily be done without removing the cap. just need a deep 5/32 socket, or a ford TFI distribution tool. the bolts holding it on are a PITA. 5.5mm but it requires a thin wall. the deep 5/32 will work, but it is a very tight fit.

napa sells the tool here

http://www.napaonline.com/Search/Detail.aspx?R=SER3197_0006403030

 

[arizonadirtslinger]

i replaced the tfi module and it is still misfiring bad any suggestions

 

[spdcrazy]

i replaced the tfi module and it is still misfiring bad any suggestions

cap and rotor still good? plugs? wires? timing? fuel filter?

 

[arizonadirtslinger]

did tune up (plugs wires cap rotor fuel filter) and just replaced ignition module

 

[spdcrazy]

check timing then! make sure your grounds are good

 

[TwoWhels]

spark plug wires on the right firing order?
your 2.8 has TFI?..thought it was duraspark

 

[arizonadirtslinger]

firing order correct (i checked it 3 times today) ground is good i have a friend with a timing light im tryin to get to come over