switching rad arms

[86MUDRCJ]

Can I use my d28 RA on a d35? I was goin to make a set of extended one but if it wont then ill just wait.

 

[Sasquatch_Ryda]

Yes.

 

[4x4junkie]

If those D28 arms have the extra bracket piece for the shock mount, definitely use them. They are better than the fixed-stud design all D35 arms have (it's fairly common for the threaded stud end to break off if there's any rust present).

I seem to recall you may have to widen the axle bolt holes a bit for the D35's bolts on some arms also, but they are dimensionally the same otherwise.

 

[86MUDRCJ]

Okay thanks man. and as far as the extra shock mount piece how is better?

 

[alwaysFlOoReD]

and as far as the extra shock mount piece how is better?

Helps support the outer portion of the stud.

Richard

 

[86MUDRCJ]

Thanks

 

[4x4junkie]

The stud mount is quite solid, mostly the benefit is that it won't break off when you go to replace the shock (important if you're in the salt belt, however I doubt you'd need to worry about this much going by the location shown in your profile).