suggestions please

[akers4291]

i really need to lift my ranger nd i want to put a 3in or 4in suspension lift on but they are really expenise... is there any cheap ways to doin this

 

[Rat City Ranger]

if it's a 4x4 you can just crank your torsion bars up front (That's free) the only drwback is it will only give you around 2-3 in. lift up front. The rear is easy, Add-a-leaf or shackles should take care of that for ya.

 

[canyoncritter]

and dont forget with just cranking the t-bars you will have little to no down travel left.so it will tend to ride harsh.

is your truck 2wd or 4wd or a edge?

4wd's there is nothing really cheap.out there that Im aware of.

2wd there is the spindal lifts...edges I belive you can get a spindal lift also for around 500