Starting My Automatic > Manual Hub Swap

[DeathMonk]

I already ordered the Warn hubs. Referencing this stickied thread:

http://www.therangerstation.com/forums/showthread.php?t=16

I saw that someone posted that you could get this at Napa. I went to Napa and they guy had no idea what to look for because all the info I could give him was the Dana part # and the other Dana axles they were used on.

Does anyone know how I can these locally, or have the part number for these for one of my local auto parts stores (napa, autozone, o'reilly, western auto). Or even a ford parts dept. at a dealership? Or maybe even another vehicle these were used on?

btw - nice site, great info

 

[DeathMonk]

Napa supposedly found the part.

Once I get the part and verify that it's correct, I will post the P/N.. Hopefully helping people out in the future.

 

[BlackBII]

Usually you can ask for the Spindle Nuts for manual hubs for a Dana 35 TTB and the parts guy can find 'em.

 

[bernerboy]

Go to the Warner Homepage and do a store locator. Thats how I found my last year when I did the swap. NAPA's unit is about 100 bucks more than the normal stocking Warner hub store.

Gene

 

[DeathMonk]

Usually you can ask for the Spindle Nuts for manual hubs for a Dana 35 TTB and the parts guy can find 'em.

I told him this.. He had no clue.

btw, your dad does some kickass work

 

[BlackBII]

I told him this.. He had no clue.

btw, your dad does some kickass work

He must have been a moron then!

Yes he does, Thanks!

 

[DeathMonk]

Just picked them up.. Looks like they're the ones.

Napa P/N: 630-1653

$16 a piece, but at least I can get it done this weekend.

 

[4x4junkie]

Just picked them up.. Looks like they're the ones.

Napa P/N: 630-1653

$16 a piece, but at least I can get it done this weekend.

Let me know if those nuts work out correct and I'll add your info to the Sticky

 

[crawlin91]

I sure hate retarded counterhelp at autoparts stores.

 

[DeathMonk]

Let me know if those nuts work out correct and I'll add your info to the Sticky

Worked out perfectly.. Yay for working 4wd!!

 

[BlackBII]

Let me know if those nuts work out correct and I'll add your info to the Sticky

Just talk to the guys a 4wp and tell 'em you need replacement spindle nuts for a D35, 7$ a side. Wish I still had the part #

 

[DeathMonk]

Just talk to the guys a 4wp and tell 'em you need replacement spindle nuts for a D35, 7$ a side. Wish I still had the part #

Locally, there aren't any 4wp stores here...

 

[BlackBII]

Locally, there aren't any 4wp stores here...

Shipping is usually pretty cheap too

 

[4x4junkie]

Worked out perfectly.. Yay for working 4wd!!

Thanks. I added the info to the Sticky