Single DIN mounting options

[triumphrider-1]

I currently have a Kenwood (came with the truck) but it is starting to give out on me so I am planning to put my old Pioneer back in . My question is what all styles of mounts are available?

I have this mount currently:
http://www.crutchfield.com/p_003FMK550/Ford-In-dash-Receiver-Kit.html?tp=3121
but would like to get one without the pocket in it, just a flush face will do for me (have plans for it later).

Thanks

 

[4x4fun]

but would like to get one without the pocket in it, just a flush face will do for me (have plans for it later).

Thanks

light switches?

iv yet to see one with out it, but i havent looked to too hard, but you have a din and a half slot, and the pocket is the standarnd fix for that, and some rangers you cam shoe horn a double din in there.

what about a peice of shiny alum. over the slot. that would look cool, and you can mount things to that.

 

[triumphrider-1]

light switches?

iv yet to see one with out it, but i havent looked to too hard, but you have a din and a half slot, and the pocket is the standarnd fix for that, and some rangers you cam shoe horn a double din in there.

what about a peice of shiny alum. over the slot. that would look cool, and you can mount things to that.

Yeah, all of the ones I've seen are with pockets too.

I thought about a double DIN, but then I have to buy that (I already have my Pioneer).

I might pick up the one in the link, or use the one I have as a model, then try my hand at laying fiberglass (done repair work before...how hard can it be to start from scratch...) I'm not real big into shiny metal bits in the cab.

 

[baxtej44]

Yeah, all of the ones I've seen are with pockets too.

I thought about a double DIN, but then I have to buy that (I already have my Pioneer).

I might pick up the one in the link, or use the one I have as a model, then try my hand at laying fiberglass (done repair work before...how hard can it be to start from scratch...) I'm not real big into shiny metal bits in the cab.

make it a little slot for screwdrivers and such lol idk...

or just melt a piece of plastic over the hole?