Securilock system activated, how to reset

[naford]

Just for the future. One time at the dealer they replaced the computer. I had 3 keys that they programed. When they went to bring the van over to me it wouldn't start. The three keys were on the same ring and confused the pat system. I've never had keys for 2 different Fords on the same key ring so I'm not sure what will happen.

 

[Redog]

I have a 2008 ranger with a 4.0L and it starts sometimes and sometimes it doesn't I pull start it its fine for a while then it works for about three times then dead, all the lights on the dash come on like normal but wont start.... I'm frustrated as I use it for work I have just had the timing chains replaced and this is the only problem I've had since anyone help me????

 

[Redog]

ranger won't start when clutch is pressed

I have a 2008 ranger with a 4.0L and it starts sometimes and sometimes it doesn't I pull start it its fine for a while then it works for about three times then dead, all the lights on the dash come on like normal but wont start.... I'm frustrated as I use it for work I have just had the timing chains replaced and this is the only problem I've had since anyone help me???????

 

[Redog]

I thought i'd ask the question as it wouldn't start last night, I was very frustrated this morning and i tried to repair it by fixing the battery terminals because it started if it was boosted but that's all, so i put dielectric tune up grease on both terminals still not start so i went to the starter ground and it was not installed properly when it was repaired by the engine shop,.... make sure you have a washer both sides of the terminal and the leg of the terminal is touching the engine for a secondary ground... it starts every time now no problem.

 

[sblake01]

Glad you got your problem solved though it really has nothing to do with the topic of this 5+ year old thread.