-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
replacing fan clutch
- Thread starter W6e6s6W
- Start date
MAKG
Well-Known Member
- Joined
- Aug 7, 2007
- Messages
- 4,634
- Vehicle Year
- 1991
- Transmission
- Manual
Depending on your engine, you may need a fan clutch tool. They run about $15.
You can always use it, but on some engines (e.g., 4.0L OHVs), you really need it because of lack of room. Make sure you get the threads right. Some are left hand threaded.
You can always use it, but on some engines (e.g., 4.0L OHVs), you really need it because of lack of room. Make sure you get the threads right. Some are left hand threaded.
calypso93
Well-Known Member
I had trouble with removing the clutch while the pump was on the motor. I took off the shroud, and removed the pump and clutch, welded the impeller to the housing and stuck it in a vise. Don't remember if it was R or L thread
(93 4L), but it was easier for me to do this way.
(93 4L), but it was easier for me to do this way.
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
