puttin in a t-5

[dans5.0ranger]

hey guys i just bought a t-5 outta an 85 mustang gt... was wonderin if anyone knew how to set up a cable mount in a second gen ranger... any input would be a help thanx

 

[jonsranger]

i am actually staying hydraulic, you can get an external slave cylinder form a f 150 and make a mount, and it should work with the stock ranger master cylinder.

 

[racinranger]

you can graft together a ranger/mustang pedal box to pull the cable. you need to locate he hole where the master was in your application. buy an after market cutch cable adjuster and a new model 94-95 mustang clutch cable they are 7in longer then fox body cables. use the ranger pressure plate with an early model 85-86 disk for the 10 spline t5 output shaft.

 

[mikepotts]

i couldnt find it by itself, but here is the solution, look at the slave cyl in this kit... it is a pull design for circle track, but can be fitted (with a little modification) to your application.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=CMB-13-0013&N=700+115&autoview=sku

 

[mikepotts]

found it here...
http://store.summitracing.com/partd...IL-260-1333&N=700+4294845603+115&autoview=sku