Project: Mall Man

[LittleBigFoot]

So what's gonna happen when you can legally drive on roads?
Will you get another mode of transportation.
I pray to a higher power that there's vehical inspections up there. But I doubt it.

For that "snorkle," maybe try using some PVC pipe to bring your air intake above the cab. The actual purpose of a snorkle. Ya know. Ya know? PVC pipe is like 3 bucks for a 2 foot section around here. An 45* elbow should run under 3 bucks and a 90 to take it into the fender should be about 3 bucks. If you're buildin a mudder, 12 bucks ain't bad.

I'm sure you got a sawzall hangin around up there. Maybe hack the fenders and run some 33s. I've seen decent sets of rubber goin for 2-300 bucks. Hell, I got my 35s for 100 bucks.

With that hole in the hood you've just got more potential to get shit all up in the radiator. When you're rhompin through that hard core newly found mud, you'll need all the cool air you can get to that radiator.

And for Budah's sake, don't stack two ramps and drive up them. I just had a truck fall on my head 9 weeks ago and destroyed the lower half of my face. Seeing that just made me cringe.

 

[Boggin]

So what's gonna happen when you can legally drive on roads?
Will you get another mode of transportation.
I pray to a higher power that there's vehical inspections up there. But I doubt it.

For that "snorkle," maybe try using some PVC pipe to bring your air intake above the cab. The actual purpose of a snorkle. Ya know. Ya know? PVC pipe is like 3 bucks for a 2 foot section around here. An 45* elbow should run under 3 bucks and a 90 to take it into the fender should be about 3 bucks. If you're buildin a mudder, 12 bucks ain't bad.

I'm sure you got a sawzall hangin around up there. Maybe hack the fenders and run some 33s. I've seen decent sets of rubber goin for 2-300 bucks. Hell, I got my 35s for 100 bucks.

With that hole in the hood you've just got more potential to get shit all up in the radiator. When you're rhompin through that hard core newly found mud, you'll need all the cool air you can get to that radiator.

And for Budah's sake, don't stack two ramps and drive up them. I just had a truck fall on my head 9 weeks ago and destroyed the lower half of my face. Seeing that just made me cringe.

funny, i was just saying to ryan {danger06} that it was the most unsafe thing i ever done but i only drove up on it took the pic and down again,
and she got the gen1 front back on her, no hole in hook and dont no what to do about air filter, it jus sittin where the airbox used to be, id like to keep it in there and cover it up some way, any ideas? thanks for the input bud

 

[Boggin]

a few quick questions im gonna try and swap the fm146 from the donor rig for the a4ld that i currently have

is there a difference in lengths between fm146 and a4ld?
and will my manual bw1350 tcase bolt up to the fm146 that i will be putting in her cause there is an electric one on the fm146 now and i wanna keep my manual tcase, thanks

 

[Boggin]

her last night being a full b2

in the shed we go

i jus finished it and now its 3:30 me and my buddy went out at it at 12:30 so took 3 hours but im happy with it

 

[Boggin]

just got the chop done yesterday, soon gonna put the roll bars in her

oh and i put the original front end back on her

 

[BlackBII]

Nice chop top! You oughtta clean it up though...looks shoddy.

On the tranny lengths, Im not sure...get out a measuring tape.

As for the Tcase, yes it will bolt up.

 

[Boggin]

Nice chop top! You oughtta clean it up though...looks shoddy.

On the tranny lengths, Im not sure...get out a measuring tape.

As for the Tcase, yes it will bolt up.

thanks buddy! i thought people werent gonna like it and yea ill clean it up sometime when i get really bored haha but for now i jus gotta get the roll bars in
and thanks ill measure them later sometime

 

[BlackBII]

Do you have a job/school?

Or do you just sit around all day contemplating on what else you could do to your BII?

 

[Boggin]

hahaha yea i got a job, there are 3 of us working at a gas bar and we make our own scedule so i only marked my name in twice this week since last week i had 5 days lol

 

[BlackBII]

what the hell is a gas bar?

I got 5 days last week...and 5 more this week.

 

[Boggin]

a gas station lol

 

[Boggin]

well i took the roll bars out of the ranger {and no, suprisingly i didnt strap on to it with the bronco and give her shit lol} and placed them in the bronco and the rear seats gotta come out no question about it, and the front bars need to be about 4" higher cause of the height difference

 

[BlackBII]

You oughtta just make a rollbar, can you weld?

Im working on one for my Bronco now...

 

[Boggin]

i can weld, but i cant bend the tubing..could i see some pics of yours for an idea?

 

[BlackBII]

i can weld, but i cant bend the tubing..could i see some pics of yours for an idea?

Meh, I don't have any pics, I just barely started. There are some good pics around though

Look in the BII Corral and BII Pics