Project Dirty White Boy

[XionicWaste]

looks good, keep us posted.

 

[kroussinoffroad]

originally came across 4-35's and somehow came across 2 more matching tire's for spare's. hopefully this thing will be trailworthy in the next week or two. still ALOT to finish up tho.

 

[Bennybooster]

MALL TERRAINS?????




Just kidding, its gunna be sweet when ya have it together

 

[kroussinoffroad]

sittin pretty

 

[kroussinoffroad]

now he just need's a


WINCH

 

[Boggin]

looks good man

 

[kroussinoffroad]

the steering on the waggy axle is over the knuckle from the factory which put's it Very close to the spring at ride height. add some flex into the scenario and she rub's. lookin at different option's at solving this issue. obviously more arch on the spring would help but that will prolly put it higher in the air then were lookin for. a block would solve the clerance issue but create a whole nother bag of problem's. if you do the high steer to this axle (allready has flattop's) you need to space the highsteer arm up to clear over the spring's. from BJ's offroad they sent a 1/2'' spacer that can be welded directly to the top of the spring perch. might throw that in place and see how close it come's while flexing it out.

down to a short list on the todo list

Hub's
front DS
hook up electric fan
reverse light's
adapt spare tire carrier
and a couple other odd's and end's such as speakers interior light and the other misc stuff

here is how we hooked up the shock's in the front
we used the bracket's off the d28 for the upper's and braced them off the top of the frame using some tube. mounting hole's in the frame were allready there like it was meant to be mounted there. lower mount's are the factory waggy mount's. the shock's are factory shock's of i belive an 89 b2 which is listed as an oddball from the other year's as this shock is alot skinnier than all the other year's and then all the ranger's but still has the same travel. It is also about half the price. it's the same shock are running in the rear and seem's to hold up nicely. vlaving is kosher and dosent fade over whoop's all in all perfrome's just like most other shocks' in alot smaller body

 

[kroussinoffroad]

seen in the last picture the tre to the pitman arm is missing this is due to the fact that b2 pitman arm is being reamed out to fit the factory waggy tre. all the steering (tierod,draglink) are the correct length and work's out perfectly. aside from the soa issue

 

[kroussinoffroad]

we took her out for some serious wheelin yesterday. unfortunately he was the small truck outta the group. but he did pretty good. made it thru everything we did. the newly installed winch got a workout a couple time's. out of the 4 trucks that went 2 of them broke axles needless to say the 7.5 wasnt long for the world and it should be gettin the 31 spline 8.8 that was under my truck. he also needs to get a new battery and possiably bigger alternator to help power the winch.

we dont have any pics of it in the first big mud hole but here it is to get a jist of it

 

[4.0B2]

i want it... still lol

 

[kroussinoffroad]

I WANT IT

I even tried to get him to trade me straight up. he just wouldnt do it. and that was before the it had 35's and a winch. mine was set ready to wheel on the 44/9 and 37s with a complete extra set of 37''x12.5 truxus mt's
definately wasnt a monetary thing since he has right around a grand tied up into the whole truck. well it is prolly gettin closer to 1500 with the winch and all.

 

[4.0B2]

yeah i'm gonna do a build like this one day.. when i'm out of college and have my own place. do a budget b2 build. sas'ed. 35's or 37's. cut fenders to keep it as low as possible. stuff like that.

 

[dangerranger83]

Safe to say i need a winchh before i do anything like that.

 

[4.0B2]

Safe to say i need a winchh before i do anything like that.

yeah that to...

 

[dangerranger83]

My last major non truck spending is going to holiday world with some coworkers, they get free tickets to get in so hopefully after all of that is done and a few other things i will get a winch on her. I think mine will be a trialer receiver setup so that i dont have to mod my bumper or brush guard plus i can take it off whenever im not going to use it.