Power Mirrors

[PlumCrazy]

How hard is it to add power mirrors to Gen 3 ranger xlt.

The truck currently is 100% manual, the only luxeries it has AC and bucket seats.

Is the wire harness standard among rangers both with and with out power mirrors, windows and locks?

 

[UrbanRedneckKid]

I'm not sure about the wiring but,
The trim around the drivers side door handle must be swapped from a P/M truck too.
The contour is different and it has the switch in it for the mirrors.

 

[AngryLepercon]

I'm not sure about the wiring but,
The trim around the drivers side door handle must be swapped from a P/M truck too.
The contour is different and it has the switch in it for the mirrors.

x2 or you can just punch a hole and just mount the switch on your handle as it is now. Shouldn't be that hard. I don't know though never done it.

 

[PlumCrazy]

I was planning on getting the all the stuff I need from a donor vehicle i was just wondering how involved it was going to be. I might add power windows as well.