• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

post your pics


How do you think they support the jacks to lift a house? Those cribs are safer than stacking cinder blocks on themselves.

I know they're probably safe, I just felt like saying that because they look just like Jenga blocks. :derisive:
 
How mine sits at the time being. Its going in for body work soon (all the rust repaired, and a new paint job, and a few little goodies). But for now, I drive an ugly ass multi coloured Ranger. I'll post new pics after the body is finished (in about a month and a half-ish).
Picture243.jpg

Picture244.jpg

*Note the "HOMO" spray painted, and then spray painted over in the lower rear corner, I never noticed that until I drove like that for about 600km.*

And the old box
Picture239.jpg
 
Repost, as I meant to post it here to begin with...SORRY!

Here we go again..................shoulda been 2 seperate pic posts, STREET and OFF-ROAD.................

Here's a few of mine again, most recent:
Bath5-20-07750pix2.jpg


Bath5-20-07750pix3.jpg


Scoopairintake.jpg


94RangerXLTinterior1-14-07.jpg


94RangerUpdatedSwitches111106750pix.jpg


Son's 93 that I built 3 yrs ago that inspired the build of mine:
93Scooped82061.jpg


KevinsToy119061000pix4.jpg


Recent cruise-in Athens, TN:
AthensCruise-In7-21-074750pix.jpg


AthensCruise-In7-21-077750pix.jpg


AthensCruise-In7-21-078750pix.jpg


AthensCruise-In7-21-0710750pix.jpg


Ok, I whored enough..................buildups of both in sig
 
My turn to show off!

My Ranger- Stole this picture from Larry. It was in his gallery, but hey it's my truck!
rm24.jpg


IMG_0785.jpg


IMG_0598-1.jpg


The Elitist's
IMG_0568.jpg


And my Bronco
c7.jpg
 


dude, I have been lookin all over the internet for...... I used to have your www. for your 4.6L ranger book marked....... I pulled alot of good tech from it and used to quote it. :pray::pray:

If I was building a street truck it would be yours ...... I also cite it as an example of selling the parts you have to get the parts you need..........
 
Last edited:
a new look for my truck...well for the time being. Dropped a little more than two inches of the body lift, switched the front bumper, installed new seats....have a few more things in store for it soon too :icon_welder:

n9111361_34570092_8746.jpg


n9111361_34570095_9779.jpg
 
looks way better without the body lift...im shooting to only have 7.5"-8" of lift with my boggers.
 
looks way better without the body lift...im shooting to only have 7.5"-8" of lift with my boggers.

yea at first i took off the whole body lift, but couldn't stand the look, so i cut a few of my block in thirds (so have like 3/4-1") i like the look now a lot more, plus it'll be more stable and less hassle from the cops for me.

another shot:

n9111361_34570094_9442.jpg
 
yeah looks a lot better, I vote for loosing the BL all together and wackin the fenders with some pacer flares
 
yeah looks a lot better, I vote for loosing the BL all together and wackin the fenders with some pacer flares

naw i had it off for a week or so while trying to get inspected, the rear sits too low (heres a before/after with and without the body)

n9111361_34431620_6654.jpg


i think it sits a lot better now, plus i didn't feel like spending 40+ dollars on new u-bolts to swap in a slightly larger block out back when i could get the same look for free (i already have belltechs and 63's).

I plan on trimming up the front once i get my new radius arms in, and winch bumper made...i have big ideas for the bed too.
 
i have big ideas for the bed too.

Do these "big ideas" involve undoing six bolts, a couple wires and with the help of a buddy setting the bed in front of yur house for sale....or better yet....weld some skis to the bottom of it and make it a sled? Then, in true hillbilly fashion, make a treated wood frame and nail some 2x6 treated boards across it and make yeself a flatbed? Are these at least close to the big ideas?
 
Do these "big ideas" involve undoing six bolts, a couple wires and with the help of a buddy setting the bed in front of yur house for sale....or better yet....weld some skis to the bottom of it and make it a sled? Then, in true hillbilly fashion, make a treated wood frame and nail some 2x6 treated boards across it and make yeself a flatbed? Are these at least close to the big ideas?

Fawk that. I'd bob and dovetail it, flatbeds are so last year.
 

Sponsored Ad


Sponsored Ad

Overland of America

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Our Latest Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top