Plaster or bondo?

[Ranger Kip]

is the top of the bed fenders (the edge around the bed) made of a plaster?

otherwise the previous owner used tons of bondo around the edges of the bed..... o_0

 

[necessaryevil]

no plaster, fiberglass or plastic dude, the entire bed is sheet metal

 

[koda6966]

Probably bondo, possibly factory. Things get dinged up when they ship it to the dealer.

 

[Ranger Kip]

I mean the top of the bed, not the inside of it..... the edge..... above the fender....

see the black edge above the back fender? where the 4 holes are that you can install a cap.....

mine is broken towards the back on the passenger side, there is metal under it, but there is a 1/8" gap between the plaster (or whatever it is), and the metal underneath of it..... it looks stock, very durable VERY! it took longer to wire brush than the metal!


Look on the passenger side.... I am at Aaron's house, so I cannot get an image till later tomorrow, or Saturday.

 

[dirttrackracer]

i dont think they ever did

 

[nate09]

should be all steel, but its possible theres bondo on it from a previous owner/accident/whatever.

 

[Ranger Kip]

thats a LOT of bondo then 0_0 and well molded too, its all even, its either bondo, or a tanish colored metal that can poweder up when removed with a brush.

 

[adsm08]

remains of a really really really crappy bed liner maybe?

 

[Ranger Kip]

idk, next your down you can take a look =P