NMB2
July 2010 OTOTM Winner
TRS Event Participant
U.S. Military - Veteran
OTOTM Winner
V8 Engine Swap
Solid Axle Swap
- Joined
- Jul 25, 2009
- Messages
- 1,444
- Points
- 3,101
- City
- Cody, WY
- Vehicle Year
- 1984
- Transmission
- Automatic
just thought I would share some of the other projects I've had going. After these two are done I'm done working on peoples junk until mine is done. Then I have a guy that wants me to build a truck for him. Basically giving me $7k to work with and I'm thinking of building an explorer.
Reworked the front suspension on this jeep and did some tweaking to the hydro assist
Installing Hydro assist on the Fo-Runna
Also installed the PSC high output pump and resevoir. I was very UNIMPRESSED with the install on the pump, the pully is about 1/8" too small to pass the bolts through. So you have to put the pump on first, then with about 4" of room in front of the pump, press the pully on. Other than that everything worked out ok other than them forgetting to send the heim joints in the original order.
Reworked the front suspension on this jeep and did some tweaking to the hydro assist
Installing Hydro assist on the Fo-Runna
Also installed the PSC high output pump and resevoir. I was very UNIMPRESSED with the install on the pump, the pully is about 1/8" too small to pass the bolts through. So you have to put the pump on first, then with about 4" of room in front of the pump, press the pully on. Other than that everything worked out ok other than them forgetting to send the heim joints in the original order.
