No Start?
- Thread starter Bronco
- Start date
- Joined
- Sep 30, 2007
- Messages
- 602
- Points
- 3,101
- Age
- 44
- City
- Lindsay Ontario
- Vehicle Year
- 1993
- Transmission
- Automatic
is there gas in it lol. have you checked for spark?
- Joined
- Oct 25, 2007
- Messages
- 19
- Points
- 3,101
- Age
- 50
- Vehicle Year
- 1984
- Transmission
- Automatic
No start?
I am back with my same problem no start. I am not getting a flashing signal to the coil from the distributor, just like the pick up coil is fried again. Only had new distributor installed for a day and same problem. Any suggestions on what tp look for?
I am back with my same problem no start. I am not getting a flashing signal to the coil from the distributor, just like the pick up coil is fried again. Only had new distributor installed for a day and same problem. Any suggestions on what tp look for?
- Joined
- Aug 7, 2007
- Messages
- 426
- Points
- 3,101
- City
- Northern California
- Vehicle Year
- 1995, 2001, 200
- Transmission
- Automatic
It was just a loose screw for me one time; but don't over tighten - the parts just need good contact.
Get a manual - or on-line source - that shows the test points and methods. These are very simple systems and should be easy to trouble shoot - If the screws are tight
Get a manual - or on-line source - that shows the test points and methods. These are very simple systems and should be easy to trouble shoot - If the screws are tight
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
