No spark


Ranger67

15+ Year Member

Joined
Mar 19, 2009
Messages
11
Points
3,101
Vehicle Year
'90
Transmission
Manual
This is for a '89-'90 DIS 8 plugger 2.3
Replaced both coils, all plugs, wires, DIS module and computer. The CKPS had the seperate green wire broke, fixed it and still no spark.

Any clues why?

Thanks
Aaron
 
Where is that located?
 
The Relay - Powertrain Control Module is located:
Under hood, driver side, front side of wheelwell, rear of starter relay, below power box, under relay cover, mounted on fenderwell
 
R there ways to check them?
 
just swap it with your fuel pump relay to test spark its right in front of it if you have spark and no fuel thats it
 
or you can pull the relay and hook up a jumper wire to pin 85 and battery power and a jumper wire from 86 to ground. then you should hear a click
 
R they colored? if they are the plugs I think they are you cant swap them.
 
Ok you said driverside......don't you passenger....cuz i'm not finding anything on the driverside....I found 2 plugs under the fuse panel.....are those it?
 
all I got are fuses....let me look again....the plugs that I found were greenish blue and black.......brb
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top