- Joined
- May 27, 2008
- Messages
- 9
- Points
- 3,001
- City
- phoenix (east side )
- Vehicle Year
- 1990
- Transmission
- Automatic
how s everyone .. project ranger motors and in, tranny same ,9 inch in four link in. bagged half done.. have to deal with wiring ,distributer,
headers (351 w )
make em or some shorties .. Here because nobody else has any answers out there. Feel free to tell me anything that u ran into that will help.Remember its low. So no lift kit will fix my issues. I made a crossmember and used a rack and pinion with bump steer kit. Kept the rest of the susp. money reasons. I have read thru lots of stuff here u guys know ur rangers.
headers (351 w )
make em or some shorties .. Here because nobody else has any answers out there. Feel free to tell me anything that u ran into that will help.Remember its low. So no lift kit will fix my issues. I made a crossmember and used a rack and pinion with bump steer kit. Kept the rest of the susp. money reasons. I have read thru lots of stuff here u guys know ur rangers.
