New to TRS, from EF

[keithisg]

I've been over at explorer forum for awhile but since my explorer recently got a cracked block I ended up getting a ranger so I figured I'd sign up here since I love your tech articles.

Have a 94 Ranger 4x4 4.0L V6

Pugly Purple

Leaking Valve cover gasket.

Anyone had any experience with this? Any tips? Figured I will replace the upper intake manifold gasket as well since it was included in the gasket set.

Have it ridin on 31" BFG M/T on stock explorer rims.

4 Hella 55w Driving lights on a explorer cargo rack mounted ontop of the cab.

JVC Headunit with infiniti speakers and some kind of tweeters.

Stock M50D Transmission.


Future plans:
6" Skyjacker
4.88
33 SS Irok's
Aussie Rear
Explorer Rear 8.8 w/ Discs
Smittybilt 8k
Custom front bumper with brushguard
Tow Hooks
Snorkle (Hydrolocked my Xplorer right before I cracked the block)

PM me about any runs going on near my area (NE NC) would like to meet some people from here and hit some trails I'm not used too.

Already realize that the sway bars have to come off soon. I went through a ditch and the passenger rear tire and front drivers tires (the two primary tires in fourwheel drive) came off the ground and couldnt droop down to get any traction. Also makes me really really want a locker.

 

[4.0B2]

welcome man. you could have been here a long time ago, we accept explorer's! they even except my b2.. all are rbv's so..

just get some pics up. i wanna see this build- make sure you start a build thread with LOTS of pics

 

[keithisg]

Pics up now!

I'll try to document everything I do. Although all I've done now is paint the accents and attach the lights.

Any questions on anything that you see done to it just let me know and I will be glad to tell you how I did it.