Need some bumpers!

[8ranger9]

hey hows it going, I have a 89 ext ranger 2.9l. I am looking to get some offroad bumpers. front and back. I attached some pics of the types of front bumpers I am looking for. I am really looking for a bolt on because I do not have a welder but am open to bumpers that require minimal welding. I also am interested in possibly getting rack for the roof . I have camper so it cannot go on that. It would have to mount above the cab. If anyone has any ideas of where I could get one or have one made for a decent price that would be great. I would prefer it to have the ability to have a winch added but that is not a must. But the bumper must be capable of having lights. Thanks! let me know guys

 

[MikeR]

James duff has some nice bumpers but they are $$$$.

 

[8ranger9]

James duff has some nice bumpers but they are $$$$.

james duff? how much am I looking at?

 

[MikeR]

http://www.jamesduff.com/newproducts/new_bronco2.asp

They are on the new prod page with prices.

View attachment 9611View attachment 9612View attachment 9613View attachment 9614View attachment 9615View attachment 9616

 

[8ranger9]

http://www.jamesduff.com/newproducts/new_bronco2.asp

They are on the new prod page with prices.

View attachment 9611View attachment 9612View attachment 9613View attachment 9614View attachment 9615View attachment 9616

yeah, definitely a little on the pricey side. But they dont have a lot to pick from. looks like two different ones. Any other places I should check out

 

[racer1044]

A local guy just bought some JD bumpers and they are top notch!

 

[ThatGuy]

So what is your "decent price" if the $425 from James Duff is too high? Do you really think you are going to get a custom built bumper to your specs for less than $400?? 2 of the bumpers you posted pictures of cost way more than that.
Here's the new 89-92 Ranger bumper from JD

 

[86MUDRCJ]

So what is your "decent price" if the $425 from James Duff is too high? Do you really think you are going to get a custom built bumper to your specs for less than $400?? 2 of the bumpers you posted pictures of cost way more than that.
Here's the new 89-92 Ranger bumper from JD

What's the difference in the years as far as the bumpers go?

 

[ThatGuy]

83-88 rangers get the endcaps like the photos of the silver B2 above. The 89-92 rangers have longer frame mounts and the fully welded, wrap around ends. 93+..... well you'll have to wait for the pictures

 

[legoms013]

83-88 rangers get the endcaps like the photos of the silver B2 above. The 89-92 rangers have longer frame mounts and the fully welded, wrap around ends. 93+..... well you'll have to wait for the pictures

JD has a 93+ bumper in the works?

OP, the middle pic is my truck. My bumper is a TJM T13 Bull bar and they quit makin them a couple years ago. A few are out there floating around for sale in the classifieds of Ranger Forum sits but they are far and few between. It was about $700 new...good luck finding one! They also made a T13 winch bar which was the bumper only no uprights or tubing...Those were a little cheaper.

 

[4.0B2]

Did you try this?
http://www.therangerstation.com/forums/showthread.php?t=397

 

[straycat]

You can try Built By Pottsy. He is on the Ranger Fourms and he sells on Ebay for the ealry model Ranger. Not bad prices with shipping. If you have a welding buddy or you can weld you can get aftermarket Jeep bumber that will work on our Rangers. Just fab up the brackets for the bumper.

 

[RangerBoy94]

Heres some pics of the one i made for my yota. It was pretty easy to build and i made it in a weekend.

Let me know if you have any questions

 

[Scrambler82]

Check with Custom 4x4 Fabrication in OK, they have a front bumper for the newer Ranger but not sure if there is anything for the older ones.

 

[8ranger9]

A local guy just bought some JD bumpers and they are top notch!

jd bumpers? where can i find those?