My latest pointless investment

[PlumCrazy]

I ordered two of these this morning
http://www.memphiscaraudio.com/products/subwoofers/sclass-subwoofers/

I will have them in this weekend hopefully, I made the box a while back and now I will finally be able to put my amp to use (it has just been an exspensive paper weight for a while now)

I will get picks up of my box and subs and amp when I get it all put together

-plumcrazy

 

[nidf88]

very nice! whats the air space requirement sealed? be extra careful during the break in period... a shallow mount sub only has soo much cone travel.

 

[Ranger#1]

why shallow iv never bin a fan imo

 

[PlumCrazy]

I think the recomended airspace for two 10" shallows was .93. It was on the website when I built the boxs, but they changed it and now I can't find it. I know I made the box to be exactly what they recomended, but that was a while back.

I went with shallow subs because I have 3rd Gen reg cab. There is like 7 inches of space between the bottom of the seat and the back of the cab (thats after you remove the carpet on the back wall) and about 2 inches of space at the top. I used to have two JL 12w6s (about 7 inch mounting depth) back there, but I had the seats slid way foward and it still wasn't enough room for a proper size box so it sounded like I had a little 8inch. Besides I'm pretty short and it was still uncofortable. I did my research before I settled on these. I have heard nothing but good things about these subs. I looked into the JL, Kenwood, Rockford fosgate, and Pioneer shallows and the Memphis are what stood out. They will take 300 rms/600 peak thats pretty good for 2.8inch mounting depth. Besides I already have a Memphis amp and having all one brand is always nice. I will still have full function of my seats and have the right sized box. Trust me, I spent a lot of time asking and looking around.

-plumcrazy

 

[Ranger#1]

do a triangle setup use corners to your advantage