my 200.00 bronco ii project

[scionguy3809]

ok i got this bronco for 200.00 im doing some body work on it but i put some 2 inch billet spring spacer on the front and puting 2 inch shackles on the rear>

here he front i now have some camber whats the best thang to get the camber back close

 

[disciplerocks]

Get some aftermarket camber bushings from Napa or Rockauto.

 

[chrwilkins30]

Yeah. Napa

 

[4.0B2]

scribed...

 

[scionguy3809]

some more work done today

started triming fenders 2" not that i had to but it was eazyer for me to trim them 2" all the way arond then to repare all the rust on the edges of the wheel wells

rear trimed and rust cab corner cut out

patch panel i bent up

rear wheel well rolled up to meet the qt panel from the 2" fender trim and patch panel all welded in

 

[scionguy3809]

driver side cab conner fix and rear will well trim 2 inchs to match the rest and then i rolled the inter well to meet the outer qt panel then i plug welded the two togeather

 

[scionguy3809]

out with the old

the new

http://i30.photobucket.com/albums/c333/s108202/Mobile%20
Uploads/IMG_4164.jpg


and how she sits now with the 2 inch spring spacers and 2 inch shackels

 

[adsm08]

whats the best thang to get the camber back close

Make sure your ball joints are'tn boned before you do anything else.

 

[FrankBoss]

I have to ask...what is Boned ball joints?

FrankBoss

 

[adsm08]

I have to ask...what is Boned ball joints?

FrankBoss

A ball joint meeting any of the criteria in definition one.

http://www.urbandictionary.com/define.php?term=boned&defid=317454


Generally floppy, having a lot of up and down or in and out play.

 

[FrankBoss]

Sorry! I didn't under stand the sentence ( are = aren't??)... I'm getting ready to do the same to my ranger and didn't want to miss a step in the process.
I'll skip the Boned part!

FrankBoss

 

[scionguy3809]

yea its going to the alignment shop here in town going to get new upper and lower ball joints and camber kit and a alignment done

 

[adsm08]

Sorry! I didn't under stand the sentence ( are = aren't??)... I'm getting ready to do the same to my ranger and didn't want to miss a step in the process.
I'll skip the Boned part!

FrankBoss

Ha, yeah. Was kinda tired when I typed that. Didn't read it as carefully as I usually do.

yea its going to the alignment shop here in town going to get new upper and lower ball joints and camber kit and a alignment done

The ball joints may be the whole problem. Might not even need the camber kit.

 

[chrwilkins30]

are you not on this site to learn something. do the balljoints yourself and then go get the allignment

 

[scionguy3809]

i know how to do the ball joints but after my vac this week i go back to 13 on 1 day off so im not going to mess ball im trying too get the body were i want it