Mild leveling on twin I beam front?

[Cheburashka]

I am planning to install the Monroe load adjusting shocks in the rear of my 95 Ranger. My understanding is that they will raise the back by about 2" when unloaded.

To avoid the rake, I probably need to level the front by ~1.5". What should I do? Not too much out there for the twin I beam suspension.

Would something like this work without any other modifications? https://www.roughcountry.com/ford-suspension-lift-kit-9264-4.html?find=1995-ford-ranger-2wd-564631

 

[Blmpkn]

Spring spacers/longer springs

 

[bobbywalter]

load adjusting or load leveling shocks?


load leveling have coil springs. load adjusting wont raise ride height.


i would suggest air shocks...only put in air to suit load. no issues with front.

 

[Cheburashka]

Sorry yes, I'm looking at the coilover Monroe Load Leveling shocks. Seems like a low price to pay for improving carrying capacity and handling at the same time.

 

[bobbywalter]

Shimming with washers via tech library may be fine then. Likely won't need to do anything.