mazda to jeep brakes

[fredneck]

does anybody know if i buy aftermarket brake line for the front of my mazda
b3000 will they work seeing as i have installed jeep dana 30

 

[martin]

If I remember corectly the balance valve on the Mazda is on the left side frame benieth the drivers seat whereas on the jeep the balance valve is just below the master cylinder so the short answer would be no. easiest thing is to buy a roll of brake tubing and some fittings and borrow, rent or buy a flaring tool and make your own. The other option is to measure what length tubes you need and then go to your local friendly auto part supplier and they usually have lengths of brake tubing with finished ends, all you have to do is bend them to fit. There are many easy options.

 

[Sasquatch_Ryda]

You talking about the flex lines from the frame to the axle right?

They should work just fine.

If you are looking for a cost effective alternative use these:

Raybestos: BH 38622, BH 38623

They are 26" long.

 

[fredneck]

thanks yes tallking bout the front