made a spindle removal tool.

[-Nathan-]

Build of it is in rangebe v2.0 build thread:

http://therangerstation.com/forums/showthread.php?p=987496#post987496

In case some of you ever have trouble getting a spindle off, whip one of these up. Took 10-15 minutes, and will save a world of trouble.

 

[tmaxxman]

sweet i will have one i beat the shit out of mine to get it off

 

[doorgunner]

hmmmmmmmmmmmmmmmmmmmmmmmm......

 

[88_Eddie]

nice, this needs to go in the homemade tool thread

 

[lethal-threat-b288]

^^^^^ I second that opinion!!! What type tube u use and nut?

 

[lethal-threat-b288]

Well shet! Lol nvm

 

[-Nathan-]

used whatever I had laying around. Doesnt matter what the nut is, as long as it threads onto YOUR slide hammer. Just so happened that a castle nut fit the one I had. The tube is just some 3/16 wall 2x2 square tubing I had. Use whatever you can! as long as you burn in your welds hot, shouldnt matter, more than enough material surface area there.

 

[Dweano]

Heeey...looks like you can use this on my truck eh?

 

[-Nathan-]

Yea it'll get used when I do your front end as well.

 

[Dweano]

Whoop Whoop!

 

[AllanD]

I was lazy I jst spent $25 on a commercially made adapter for my slide hammer.

the advangage to the commercial tool is that it has THREE different threads so it'll work
on D28/D30, D35/D44 and D50/D60 threads.

My puller "lives" on an OTC slide hammer (I own two)

AD

 

[-Nathan-]

yeah I couldnt find one locally, and it only took a couple minutes to make, so why not plus tools that you make yourself are always cooler