LOOKING... lift kit parts

[horny ranger]

hey.. im looking for a lift kit for my 2002 ranger 2WD... i need something like a 2" lift so i can fit the 31x10.5's on... or if anyone has any good idea's ... im all ear's...
thanks

 

[rangerdude91]

if i was you i would just put a 3in BL on it. that way you've got plenty of clearance for the 31's. i have a friend who actually ran his 2wd 2000 4 banger with 33x12.5. he rubbed a little at full lock of the wheel and when he hit big enough bumps. he also blew out his trans, then replaced it, replaced it a second time, and then rolled it(very reckless)

go the a tire dealer and ask them to let you take a 31 to your truck just to check for clearance. my local merchants let me do that when i wanted to check clearance on my truck before i lifted it and went to 35's

hoped this helped some

Nathan

 

[horny ranger]

iv actually already done that... the 31's are only about 1.5 - 2 inches bigger than the tires iv got one my ranger now... im just worried about rubbing in the corners at full stearing lock... although the tread on the tires im looking at are really only all terrains they are not really that aggressive... will that make much of a difference???

 

[JohnnyO]

FabTech and Camburg make 2wd lifts. Most involved a dropped spindle that lowers the hub and blocks for the rear.

 

[fordboi415]

you can get 2" inch lift coils from suspension max (for 100 bucks and some change and that's shipped to your front door) and that would give you the clearance plus level the truck for a much cleaner stance